Blog posts about Education, CyberSecurity, Digital Citizenship, Privacy, InternetSafety, curation, PKM, PLN, blogging, Global Collaboration, Coaching, Collaboration, eSkills, eLeadership, Coding, MakerED, MakerSpace, Social Media, How to learn, learning to learn
Through the Maker-Movement and IoT (Internet of Things) there is already a LOT happening and different Networks are collecting Data through Sensorsand make them available for everybody to have access and study them! Such sensors are e.g.:
Air Quality
Meteo
Street traffic
Radiation
People (counter) traffic
Water Quality
Wind velocity
Radar for excess of car speed
Inundation prevention
Observations on:
Nature (birds, etc.)
Archaeology discovering
…
Those, above mentioned applications can even be assembled together and so being a precious source for communes and Governments! Mostly such projects are done with an ARDUINO and/or Raspberry PI based micro controller and a mini computer: The main difference between them is Arduino is microcontroller board while Raspberry PI is a mini computer.
Thus meaning: that fits perfect for the Maker-Movement and could GET integrated easily into STEM projects!
Well, after following for a long time different possibilities on the How-To to get globally access to such IMPORTANT Big-Data for everyone, I found out THAT “The Things Network” is a perfect way! Please find below the address and the projects:
Key words necessary for me to create this blog post: CitiZEN-Science, STEM, MakerED, Maker-Spaces, PracTICE, LEARNing-By-Doing, TTN, The Things Network, Arduino, Raspberry PI, LoraWAN, SigFox (Low Power consumption…)
.
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure).
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
CitiZEN-Science: WHAT is it and is it worth to follow?!!
[Begin Text Wikipedia]:
Citizen science (CS; also known as community science, crowd science, crowd-sourced science, civic science, volunteer monitoring, or online citizen science) is scientific research conducted, in whole or in part, by amateur (or nonprofessional) scientists.[1] Citizen science is sometimes described as “public participation in scientific research,” participatory monitoring, and participatory action research whose outcomes are often advancements in scientific research, as well as an increase in the public’s understanding of science.[2][3] Based on Alexa rankings[4]iNaturalist is currently the most popular citizen science website[5] followed by eBird[6] and then Zooniverse[7] in second and third place respectively.
[End Text Wikipedia]
Find below a GREAT article, who explains very well:
[Begin Text SciStarter]:
As we face global challenges, we may want to find local ways to make a difference in protecting endangered species, safeguarding water sources, preventing disease, or accelerating medical research. Science needs more eyes, ears and perspectives than any scientist possesses. Enter citizen science: a collaboration between scientists and those of us who are just curious or concerned and motivated to make a difference. People just like you are collecting data by taking photos of clouds or streams, documenting changes in nature, using smartphone sensors to help scientists monitor water and air quality, or playing games to help advance health and medical research. A citizen science project can involve one person or millions of people collaborating towards a common goal. Typically, public involvement is in data collection, analysis, or reporting.
There are thousands of opportunities to participate in this movement that’s sweeping the globe! Find them on SciStarter.org .
[End Text SciStarter]:
Well, I don’want to say much more about this, apart that I back it up! I find it extremely interesting and it should get used in schools as it would certainly make students interested into Science.
As far as I know, it is ALSO used in a school in my country Luxembourg:
Key words necessary for me to create this blog post: CitiZEN-Science, STEM, MakerED, Maker-Spaces, PracTICE, LEARNing-By-Doing,
.
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure).
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
Actually (January 2020 and even before…) there are a lot of warnings from Cyber-Security experts and EVEN from the FBI concerning Smart-homes and its connected devices:
SO NOW, after having bought a Smart-TV and other so-called smart devices which are connecting to the internet, WHAT to do? First of all: do YOU really need it, as nearly any devices are getting sold with IoT capabilities? IF NOT, WHAT to do?
Before connecting the power:
Check your Router settings and block any unknown devices!
IF you are able to access your IT device, change straight the manufacturer password; give it a STRONG password!
Concerning passwords: I recommend to use a Password-Manager such as:
With a Password-Manager you just need to remember a Master-Password and ALL other Passwords will get generated with a STRONG Password from the software itself!!
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure).
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
.
. Stay tuned for next blog post(s) 😉
.
.
.
.
.
.
.
.
.
Keywords necessary for me to create this blog post: Routers, Passwords, authorization, IoT, Smart Home, Smart TVs, vigilance, connected stuff, Responsibility, Cyber-Hygiene, Digital CitiZENship,
Safer Internet Day (SID) is organised by Insafe in February of each year to promote safer and more responsible use of online technology and mobile phones, especially among children and young people across the world.
Safer Internet Day 2020 will be celebrated on Tuesday 11 February 2020, with the strapline of ===> “Together for a better internet” <=== following the success of last year’s campaign.
My participation for the SID2020
WHAT is special this year with my participation on SID2020?
I created a ===> #GlobalCollaboration blog in 2017 <=== from @knolinfos (my pseudo on twitter) & @ICTPHMS& @kimmindy7 for #LEARNing about #DigitalCitizenShip. The authors are from Luxembourg/Europe (me), one female teacher from the USA and a male teacher from the USA WHO are using my blog post to learn together and sharing THEIR practice with YOU dear readers.
Well, there is a lot of different views about ===> Digital CitiZENship <=== WE will explore WHAT could be THE BEST way to teach and to learn about Digital CitiZENship (hashtag on Twitter is #digcit).
How does it come that I post Global-Collaboration blog posts? Well, once the #ProfessionalDevelopment is Upto-Date, one does understand THAT learning in a team brings out a win-win situation and that a generation exchange is benefit for all of the participants as anyone learns from each other. BTW: here below other Global-Collaboration blogs with teaching persons from Australia, USA, France, Luxembourg (me):
Contributions de Gust MEES: Publications sur leBlog de Gust MEES (in English) avec 202K (202.000) views „Digital Citizenship“ Global Education Collaboration Blog (in English),
Publications sur le Blog von Gust MEES (auf Deutsch),
Cyber-Security is a shared responsibility, WE are ALL responsible for a more secure Internet and it is ===>OUR responsibility to build up the future for OUR kids, learners and students!<===
WE can do it by learning and teaching the basics of Cyber-Security and ALSO by helping international organizations such as “Safer Internet Day” to become a catalyst for such a difficult task!!!
.
======> WE are living in a world of connected technology, Cyber-Security is a MUST!!! <======
.
.
That is why I am participating on SID2020 with my FREE courses here:
MOTIVATION: Knowing NOW how important it is to take part of such a great Event, I encourage YOU ALL to take part of it by any possible action, even as a private person! I encourage especially private persons to display the banner from SID2020 on their blogs and/or websites
People who are on Twitter may use the hashtag #SID2020 to promote that Event, thanks for Helping to make the Internet a more secure place!
.
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure).
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
Strange, I make an introduction about Hygiene in an Cyber-Security Blog, ISN’T it?!! Well, there is a reason behind:
WHEN WE use a computer, Smartphone and/or any OTHER technical device (such as cars as well…) WE need to take care of them! AND our body? The same: WE need to have the daily reflexes to make for sure that WE don’t expose it to invasions of bacteria, virus, etc. Examples given: brushing teeth, showers, washing the hands after a toilet go, washing the hands before and after a meal, etc. Wearing a Condom when having sex, a necessary protection! Well OUR condom for the technical devices is the Anti-Virus, a MUST for Any-devices!!! Any-Devices, Apple as well?!!! YES!!! Please check the WHY in my Curation below please:
WE are used to these reflexes, aren’t WE?! At least WE should be!! SO, for computers, Laptops, Smartphones, tablets (iPads etc.), IoT devices (Smart-Home), WE should do the same, they costs a LOT of money and expensive stuff should get taken care of!! THE OTHER reason as well is, THAT WE are using the internet with THEM and so WE are meeting OTHER people with OUR technical device (which ever one it is…).
SO, that exactly the same as WHEN WE are meeting (as persons) OTHER people in Real-World: WHEN WE have a flu, WE will infect OTHER persons with it and an epidemic will occur!! WHEN OUR technical devices (which ever one it is…), connected to the internet, are NOT Up-To-date with the latest Updates they are vulnerable to threats (see it as a virus, e.g.) and once infected, WE will infect ALL the OTHERS as well (epidemic…)!!
As WE use these #AnyDevices with #AnyOS on a daily base, WE SHOULD be aware and develop a sense of Responsibility to protect each other!
Well, the above written is ONLY an introduction, please read my Blog posts in different languages (EN, FR, DE):
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure)..
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
Image credit. please click on it to view its source.
.
Maker Inspiration-WHERE to GET Information to Stay Informed?
Well, you jumped in into the world of makers (OR want to do SO soon…) and you feel comfortable with it? You found out THAT it is important to learn about THAT movement as it brings out creativity and a BETTER understanding in EDUcation WHEN one touches the stuff and it is done by YOURSELF???!!! You learned THAT <===> #LEARNingByDoing <===> is VERY important???!!! THEN, of course you would like to stay informed about WHAT is going on around in the world of THAT movement, ISN’T it???
I would suggest you to read my following blog posts first, please, before I will give you some VERY interesting links to stay Up-To-Date:
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure).
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
Sometimes it might be useful to write a text which should be displayed on a LCD display without any cabling, that is possible to do over your own Wi-Fi network and a NodeMCU ESP8266 module. And the project uses ONLY 4 wires as the LCD1602 gets addressed over the I2C bus. Let us remember WHAT the I2C bus is in our previous tutorial:
Let us have a look on the video below who shows how it works:
.
.
SO, knowing now how it works, let us have a look on the Sketch (Code). I changed a bit the code, as I am using an I2C LCD1602 and I added as well some more text displayed on the LCD1602 display. Check below, please, the original code. I will explain WHAT could (should) GET changed later with a screenshot of the changes and/or a download…
The Arduino code and the library for this project can be found at the links below. The library has to be saved in the Arduino libraries folder of the same name:
The download is a text file created with OpenOffice, copy the content and place it into a new Sketch on the Arduino IDE. ALL you have to do now is to change some lines, e.g.:
in line 47: Enter your SSID
in line 48 Enter your Wi-Fi Network Password
See PIC below, please:
.
Click image, please, to enlarge.
.
This should work for you now; in case of that you wouldn’t see the display working find here the trouble-shooting:
Mostly it is that your LCD1602 uses a different I2C-Address and/or that the ESP8266 isn’t allowed in your network for security reasons, to make sure check my blog post here, please:
Here below a working Sketch which shows how it is working: for security reasons you won’t see my SSID, nor my real IP-Address! 😉
.
.
.
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure). L’auteur était aussi gagnant d’un concours en électronique en 1979 ( Pays germaniques ) et voyait son projet publié dans le magazine électronique “ELO”.
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
The author was also a winner of an electronics contest (Germanic countries) in 1979 and got his project published in the “Electronics Magazine ELO”.
.
Stay tuned for next blog post(s) 😉.. .
Keywords necessary for me to create this blog post: NodeMCU, ESP8266, Web Server, I2C, LCD1602, Coding, Maker, MakerED, MakerSpaces…
In our previous tutorials we were using already the NodeMCU ESP8266 Wi-Fi Module and we discussed about “Security“, “Cyber-Security” issues while using “IoT“, “Internet of Things” and the importance that the router MUST be protected by a NEW password and NOT ALLOW to let connect any devices to our router/internet, unless we decide to let them (ONLY our owns) connect!
It was a bit a difficult procedure to find out the “MAC Address” of the NodeMCU ESP8266 Wi-Fi Module, isn’t it?! Well there is a more easy way to find out with a little Sketch.
Please check the tutorial and copy the Sketch from:
Now it is much more easy to run a project with a NodeMCU ESP8266 Wi-Fi Module. Connect your module to the computer through the USB cable, chose the board in the Arduino IDE and upload the sketch. Check below the how-to, please.
Click the image, please, to enlarge.
.
Please check again (I don’t want to reinvent the wheel…) the tutorial below who explains very well in detail:
Once having the “MAC Address” of our NodeMCU ESP8266 Wi-Fi Module we can now easily incorporate it into the allowed devices in our router.
.
NOW, click on the button “Add Wireless Device” as shown in above image.
.
Click image, please, to enlarge.
.
A new window opens where you can add the new devices “MAC Address” which you wrote down before. Do so please and then click the button “OK“. Go back and have a look if the device is now in the authorized devices in your Network.
SO, now when you use a Sketch with “IoT” with the NodeMCU ESP8266 Wi-Fi Module, the device is recognized and allowed in your Network!
.
.
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure). L’auteur était aussi gagnant d’un concours en électronique en 1979 ( Pays germaniques ) et voyait son projet publié dans le magazine électronique “ELO”.
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
The author was also a winner of an electronics contest (Germanic countries) in 1979 and got his project published in the “Electronics Magazine ELO”.
.
Stay tuned for next blog post(s) 😉.. .
Keywords necessary for me to create this project: ESP8266, Wi-Fi module, ESP8266 and Adafruit Feather HUZZAH NOT the same pinout!!, where to buy?, Arduino IDE, web server, Coding, Maker, MakerED, MakerSpaces, IoT, Internet of Things, Router,
ESP8266 WiFi Weather Station with Color TFT Display
We were playing around already with LED MATRIX’s, devices to visualize measured values and/or texts. In this blog post (Tutorial) we will use a TFT Display (Thin-film-transistor liquid-crystal display) with touch screen to display a three (3) days weather forecast with moon phases. This little weather station acquires its data over a Wi-Fi connection from an online weather server, Wunderground.
What is GREAT with this project, there ISN’T any wiring, no cables to connect; apart from plugging in the accumulator! 😉 BUT, please check the video below who explains in detail:
.
.
Detailed parts list, supplier and prices
Please find below the detailed parts list as well as the supplier and the prices.
As you can see the price is reasonable for this project, ONLY 62.40$and easy to realize! ALL what YOU need is a bit time, passion and here we GO! 😉 Have FUN!
There is some preparation needed before we can test our code for the weather station: I suggest that you read and that you follow each step as shown in this tutorial by ADAFRUIT (very important, otherwise it won’t work!!):
It isn’t difficult, but it needs some time and you must be careful to follow each step!
We need ALSO an account on the weather server Wunderground to create our “API” (Application Programming Interface) which we need to implement in our code settings! THIS is also well explained here:
Same procedure as explained already above, follow very carefully each action step by step!
.
Are there some pit falls?
YES, this could be!
It ONLY works with the ADAFRUIT Feather HUZZAH!!! It’s an ESP8266 but it has a different PINOUT as the normal ESP8266!!
When it doesn’t work, you won’t GET an internet connection, thus meaning that you see on the screen “Internet Connection” for a loooong time, without that the weather data gets shown, you didn’t follow step by step the instructions!! Check our previous blog post (Tutorial) on How-To let the NEW device GET access to your Network:
Well, you haven’t encounter any problem or the problems are solved, this is WHAT you will see appearing on the TFT:
1
2
3
4
5
6
.
As you can see in “Picture 6“, that is what shows up on the first start! Is it the right time which is displayed? Is it the right measure unit which is displayed (°C OR °F)? If SO, it is OK then, if NOT, then we have to look on the code and change some settings!!
Here below the How-To:
Open the Arduino IDE and click on the “Settings.h” tab, check below where and how to change (adapt) the settings to your country and time zone.
.
Click the image, please, to enlarge
Once done, save the code and upload it again. You will GET the right data displayed then as shown below:
.
.
.
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure). L’auteur était aussi gagnant d’un concours en électronique en 1979 ( Pays germaniques ) et voyait son projet publié dans le magazine électronique “ELO”.
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
The author was also a winner of an electronics contest (Germanic countries) in 1979 and got his project published in the “Electronics Magazine ELO”.
.
Stay tuned for next blog post(s) 😉.. .
Keywords necessary for me to create this project: Adafruit Feather HUZZAH, ESP8266, Adafruit Feather TFT Display, 3 days weather station, weather forecast, moon phases, Wunderground, Wi-Fi module, ESP8266 and Adafruit Feather HUZZAH NOT the same pinout!!, where to buy?, time zone, metric, imperial, °C, °F, Arduino IDE, web server, weather server,
First Steps with the ESP8266 Wi-Fi Module | Scrolling Text (Time, Temp., Humidity…) with 8×8 LED MATRIX
In our previous blog post (Tutorial…), we were playing around with a LED MATRIX <===> First Steps with the Arduino-UNO R3 | Maker, MakerED, Coding | Scrolling Text with 8×8 LED MATRIX <===> and we will continue to use the LED MATRIX, but this time with a Wi-Fi connection. We will use the module “ESP8266” which you can purchase worldwide around as it is very popular and it costs ONLY 7.49 €. I ordered mine on Amazon in Germany:
Check the How-To on the video below @ 5:51 minutes.
.
Check the video below please who explains the first steps with the ESP8266:
.
.
Now that we have configured the ESP8266 in the Arduino IDE we need some other information which are necessary to implement into the code. It is the name of the Wi-Fi Network (SSID) and the Password for the Wi-Fi Network. AND a new device connecting to the router (the ESP8266) must GET allowed to do so, if your router is well configured for Cyber-Security! Thus meaning for Cyber-Security reasons: in the router security settings any device connecting to your Wi-Fi Network SHOULD NOT have access unless it is your own ones and unless you allow THEM to access!
.
My shown images from the Router are from a “FritzBox Router“, but it should be similar in other Routers!!
.
Click image, please, to enlarge.
In the above image you see which devices are connected to your Network, to do so: open your router with your login and/or password and look under “Radio Network” (or similar). IF you don’t see your “ESP8266” in the Network while you run the code and it isn’t working does mean that your Network is well secured as it doesn’t allow any other device connecting to the Network!
Click above image, please, to enlarge.
.
You need then to give permission to the device to connect. To do so: Open the Security settings in your Router and click on “Allow all new wireless devices“. NOW, you will see that the “ESP8266” is part of the Network! Note down on a piece of paper its “MAC Address” and protect your Network again by clicking on “Do not allow new wireless devices“!!
.
Click on the image, please, to enlarge.
.
NOW, click on the button “Add Wireless Device” as shown in above image.
.
Click image, please, to enlarge.
.
A new window opens where you can add the new devices “MAC Address” which you wrote down before. Do so please and then click the button “OK“. Go back and have a look if the device is now in the authorized devices in your Network.
Required:
SSID
WLAN Password
Acces authorization for the Wi-Fi
…
The Code for the ESP8266 and first try
I used a video tutorial in German from Switzerland as well as its Code for this project as it is very well explained. Even if you don’t understand German, you can follow step by step in the video:
.
.
While watching the video on YouTube, you will find the download link for the code, check below please:
.
Click image, please, to enlarge.
.
You can find another interesting code here on the blog as well as the wiring diagram and a GREAT description (in German):
Unzip the code and install it by following the video instructions; check @ 8.30 minutes and follow step by step…
After everything is installed and the code is in the Arduino IDE you need to adapt the code to your needs: check video @ 10.36 minutes
Entering your Network name, the SSID
Entering the Network-Key; Check above Router images…
…
.
When you run the code for the first time: disconnect the two wires for the power supply (GND and VCC) as the LED Matrix will light all the dots and the power consumption will be by 1.5 Ampere; thus meaning the components, especially the chips will become hot, even could get overheated!! Once the Arduino IDE shows you that the code is uploaded reconnect them and it should work.
.
That’s it folks; now you can run the code and have fun! I takes a bit time before the code runs: first “Compiling Sketch…“, followed by “Uploading…” and “Done Uploading…” and the ESP8266 tries to connect with the Wi-Fi Network…
.
If everything was made correctly as described above you should receive now your personal weather data… FIRST the time will GET displayed for a couple of seconds (that period could GET changed by your settings in the code…)…
.
.
Then the scrolling text starts displaying the temperature, humidity, air pressure, rain risk in % and wind speed…
.
.
Stay tuned for next blog posts and enjoy it 😉
Have FUN with your “LEARNing-By-Doing project” and try out ALSO the other examples 😉
.
Keywords necessary for me to create this blog post: Arduino, Wi-Fi, wireless, ESP8266, Weather received through Wi-Fi, LED Matrix, Coding, Maker, MakerED, MakerSpaces, Learning By Doing, Learning To Learn, PracTICE,
.
.
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness andSecurityEnhancementStructure). L’auteur était aussi gagnant d’un concours en électronique en 1979 ( Pays germaniques ) et voyait son projet publié dans le magazine électronique “ELO”.
The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).
The author was also a winner of an electronics contest (Germanic countries) in 1979 and got his project published in the “Electronics Magazine ELO”.
.
Stay tuned for next blog post(s) 😉.. .
Keywords necessary for me to create this blog post: Arduino UNO R3, Arduino NANO, MAX7219 LRD DISPLAY, Coding, Maker, MakerED, MakerSpaces…
Check my #curation to find best articles, blogs and courses about #education #itsecurity #CyberSecurity #EdCollCoach #GlobalEDU #cyberbullying, #AR #RA #augmentedreality #health #science #QR #qrcodes in EN, FR, DE…
Play the FREE Game and Learn about Cyber Security and Coding
App Advisor
App Advisor helps safe-guard your personal data by telling you exactly which apps you should be cautious of, before they become a threat to your privacy.
Click image to use this free service and find out of your installed Apps are “privacy-friendly” or check new Apps before installing them!
L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness and Security Enhancement Structure).
EDU: Digital CitiZENship, CyberSecurity, eSkills, Modern EDU by Gust MEES 