RSS

Grove Beginner Kit for Arduino | SEEEDSTUDIO | The BREAKOUT | GROVE Pressure Sensor BME280 on GROVE LCD1602 Display |First Steps with the Arduino-UNO R3 and NANO | Maker, MakerED, Maker Spaces, Coding

19 Dec
Grove Beginner Kit for Arduino | SEEEDSTUDIO | The BREAKOUT | GROVE Pressure Sensor BME280 on GROVE LCD1602 Display |First Steps with the Arduino-UNO R3 and NANO | Maker, MakerED, Maker Spaces, Coding

.

 

.


GROVE Pressure Sensor BME280 on GROVE LCD1602 Display

In a previous tutorial WE have seen the Grove Beginner Kit for Arduino from SEEEDSTUDIO https://gustmees.wordpress.com/2020/08/03/grove-beginner-kit-for-arduino-seeedstudio-first-steps-with-the-arduino-uno-r3-and-nano-maker-makered-maker-spaces-coding/, and THE BREAKOUT to use the different modules with OWN Code examples.

WE were ALSO using the OLED module as a BREAKOUT in this tutorial https://gustmees.wordpress.com/2020/10/21/grove-beginner-kit-for-arduino-seeedstudio-the-breakout-temperature-humidity-on-oled-display-first-steps-with-the-arduino-uno-r3-and-nano-maker-makered-maker-spaces-coding/

In this tutorial WE will use the BREAKOUT of the GROVE Pressure-Module BME280 together with a GROVE LCD1602 display. As the GROVE LCD1602 display is not included in the Grove Beginner Kit for Arduino, WE will need to buy it! Here below the address:

 

GROVE BAROMETER BME280 BREAKOUT

GROVE BAROMETER BME280 BREAKOUT

.

Connections of the GROVE BME280 and the GROVE LCD1602 on I2C BUS

Connections of the GROVE BME280 and the GROVE LCD1602 on I2C BUS

.

Well, as you can see in above photo there is NO cabling!! You just need to connect the connectors from the BME280 and the LCD1602 to the I2C BUS. Less than a minute work and you are ready to upload the code, which you will find in below link:

.

The GROVE LCD1602 display is a RGB display, meaning that you can change its color to RED, GREEN, BLUE! Play around with the code to experiment…

.

GROVE Barometer BME280 on GROVE LCD1602

.

.

Here below the part of the Code where you can change the color settings!

.

 

 

Check out more here

 

 

Have fun learning with PracTICE and stay tuned for next adventures of learning 😉

.

L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet  ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness and Security Enhancement Structure).


The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).

.

.


.

Keywords necessary for me to create this blog post: Arduino UNO R3, Arduino NANO, Grove, Grove Beginner Kit for ARDUINO, Coding, Maker, MakerED, Maker Spaces, LCD1602, BME280, Pressure, Altitude Monitor, I2C, SEEDSTUDIO,

.

.

.

.

.

.

 

.

 

Tags: , , , , , , , , , , , , , , , , , , , , , , , ,

Leave a comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.