RSS

Tag Archives: Electronics Art

Maker-First Steps in Electronics-Soldering Learning-The Mini BUG Robot

Maker-First Steps in Electronics-Soldering Learning-The Mini BUG Robot

.

The Mini BUG Robot

.


The Mini BUG Robot

In last blog post (tutorial) WE were practicing OUR soldering by creating “JOHNNY the ski-man“, a bit “Electronics-Art” using electronics components. In the video below, which I created with the FREEWARE <===> Windows Movie Maker <===> WE see ALSO “The Mini BUG Robot” who gives “JOHNNY” a ride. It is very easy to build that mini robot as there are ONLY six (6) components to solder.

.

.


The schematics

Let us first have a look on the schematics where WE will discover some NEW stuff, a mini motor; in this case it is an “vibration motor” which is used in smartphones. THEY exist as round, rectangular and in disk format, please check <===> Vibration Motor Images <===> in Google searches (images).

.

minibug-robot-schematics-screenshot

.

As you can see there is NOTHING special; we just put four (4) elements (2 LEDS, a vibration motor and a tantalum capacitor) in parallel. And we have a switch to switch on/off our circuit. As battery we use a “CR2032“.

Learn more:

.

vibration-motor

Click image please to access the article.

 

.

 


The electronics parts list

Check below please to find out about the electronic components.

.

The Mini BUG Robot Parts list

Click image please to enlarge.

.

Detailed parts list, supplier and prices

Please find below the detailed parts list as well as the supplier and the prices.

.

Item and quantity

Supplier and order number

Price

1 x Stripboard CONRAD: 529531 2,19€
Silver wire 1 mm / 14 m <===> +/- 30 cm needed CONRAD: 607657  0,40€

1 x Tantalum capacitor 47 uF/16V

CONRAD: 481777

 2,99€
1 x Switch CONRAD: 1377837 2,19€
1 x Button cell holder CONRAD: 650546  1,29€

1 x Vibration motor from old smartphone

 

2 x 3mm LEDs red CONRAD: 759472 à 0,20€ 0,40€
1 x Cell CR2032 CONRAD: 651088  4,19€

Total:

 13,65€

.

As you can see it is a very cheap project, ONLY 13,65€ and easy to realize! ALL what YOU need is a bit time, passion and here we GO! 😉 Have FUN!

.


The tools needed

Check below please WHAT the tools are that you will need for this project. The small saw is needed to cut out a small piece of 55 x 45 mm from the stripboard.

.

 

tools-list-electronic-arts

Click image please to enlarge.

.


The soldering

The Mini BUG Robot-Solder side

Click image please to enlarge.

.

.

.

.

.

.

Feel FREE to make the wiring and connections as YOU want by following the schematics; on left-hand side you will see how I did it. Fix the vibration motor with a bit hot glue onto the stripboard as well (components side).

.

.

.

.

 

The Mini BUG Robot.

.

.

.

Concerning the legs of the “Mini BUG Robot”: Cut 2 pieces of 9 mm off from silver wire and bend them both sides at +/- 3,5 cm, see PIC please, and solder them onto the stripboard.

.

.

...


Very important

In OUR above project we are using two (2) 3 mm red LEDs in parallel. It DOESN’T work when YOU take two different colors, I tried it out 😉 WHY!??? Please check links below:

.

 


.

GUST-AVRIL2014-800px-2L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet  ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness and Security Enhancement Structure). L’auteur était aussi gagnant d’un concours en électronique en 1979 ( Pays germaniques ) et voyait son projet publié dans le magazine électronique “ELO”.


The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).

The author was also a winner of an electronics contest (Germanic countries) in 1979 and got his project published in the “Electronics Magazine ELO”).

.

Stay tuned for next blog post(s) 😉

.

.

 

 

 

 

Tags: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Maker-First Steps in Electronics-Soldering Learning-Electronics Art

Maker-First Steps in Electronics-Soldering Learning-Electronics Art

. Electronic-Arts: JOHNNY the ski-man .


Maker-First Steps in Electronics-Soldering Learning

When WE start with electronics on the beginning we can work with so-called “Breadboards“(see photo below please), but soon or later soldering will become a MUST and an habit! SO, the BEST WE can do is to GET some PracTICE with soldering; in this tutorial we will make a bit “Electronics-Art“. WE will use already known electronic components such as resistors, stripboard parts (we will need to saw and rasp…),  a LED and an IC (Integrated Circuit), a NEW component. OUR project will ONLY serve as soldering PracTICE as there will be NO function of the electronic used, SO the IC could be ALSO a damaged one (useful recycling) 😉

breadboard-1

Breadboard: Click image please to enlarge

.

Learn more:

.

 

resistors-watts

Please click image to access the article for more information.

.

.

As YOU might have seen in the image of “JOHNNY the ski-man“, some resistors are BIGGER then others! WHY and what is its meaning!? Well, WE have to go back to “OHM’s Law“, as BIGGER resistors in size are, as MORE POWER they can dissipate; I used 1/2 Watt and 1 Watt resistors. Please check below.

.

.

.

.

.

Learn more:

.


Parts List of the components used

parts-list-electronic-arts

Click image to enlarge please.

.

.

The following components are required:

Six (6) resistors of 1/2 Watt, two (2) resistors of 1 Watt, one (1) IC (14 or 16 pins), one (1) LED, two (2) diodes (1N4007), some colored rigid wire for the scarf, 1 mm² rigid copper cable wire and 1 mm silver wire.

.

.

.

 


Tools needed.

tools-list-electronic-arts

Click image please to enlarge.

.

.

.

The following tools are required:

Vise, rasp, solder iron and solder wire, electronic cutter, electronic flat-nosed pliers, small handsaw and don’t forget the vacuum cleaner for cleaning up the working place later, please 😉

.

.

.

 

..

 

Learn more:

 


Where to start? The mechanical part

sawing the stripboard

Click image please to enlarge.

.

.

.

WE will start with the hardest part of the job, the skis. The skis are made of a small part of a stripboard which has to be sawn; we count four (4) holes and saw along the strips there, see pic. The length would be about 5 cm ( +/- 2 inches).

.

.

.

ski detail

Click image please to enlarge.

.

.

.

Once the two (2) pieces of the stripboard sawn they must get rasped to look smooth. See pic please.

.

.

.

.

Skis detail

Click image please to enlarge.

.

.

As the stripboard pieces are rectangular on the edges they must get rounded as well with the rasp, see pic details please.

Solder together now the three rows on the top of the stripboard as shown in image, this will give a bit weight to keep the balance once the other electronic components are soldered.

.

.

.


The soldering

Soldering order details

Click image please to enlarge.

.

.

.

SO, the hardest job is done now! UP to solder the electronic components, but where to start!? Start first with the soldering of the diode (1N4007) on both skis, followed by soldering the small resistors, check pic please.

.

.

.

.

.

A little exercise: WHAT are the values in OHM (Ω) of the resistors used (check pic, please)? Hint: if YOU don’t remember how the code is working, check here <===> http://www.allaboutcircuits.com/textbook/reference/chpt-2/resistor-color-codes/ <===> and/or here for an online calculator <===> http://www.allaboutcircuits.com/tools/resistor-color-code-calculator/.

BTW: for OUR project it doesn’t matter which value the resistors have as they are used ONLY for the soldering PracTICE..

Concerning the PracTICE about soldering check <===> https://www.kemo-electronic.de/en/loetkurs.php?page=1 <===> A GREAT step-by-step guide.

.

Hint: For THOSE who can’t wait for NEXT tutorial, have a look on my proposed links in this tutorial and YOU will find more 😉

.

Check out ALSO, please, my my other blog posts about Maker, MakerED, MakerSpaces:

.


The finished project

SO, that’s it folks!  Wishing YOU some fun with this project and hopefully you will get more interested about electronics 😉 Check the video below please to see OUR STAR in action… BTW: The “Mini BUG Robot” present in the video will get proposed ALSO in another tutorial…

.

.

.


.

GUST-AVRIL2014-800px-2L’auteur Gust MEES est Formateur andragogique / pédagogique TIC, membre du “Comité Conseil” de “Luxembourg Safer Internet” (LuSI), appelé maintenant BEESECURE, partenaire officiel (consultant) du Ministère de l’éducation au Luxembourg du projet  ”MySecureIT“, partenaire officiel du Ministère du Commerce au Luxembourg du projet ”CASES” (Cyberworld Awareness and Security Enhancement Structure). L’auteur était aussi gagnant d’un concours en électronique en 1979 ( Pays germaniques ) et voyait son projet publié dans le magazine électronique “ELO”.


The author Gust MEES is ICT Course Instructor, ”Member of the Advisory Board” from “Luxembourg Safer Internet” (LuSI), BEESECURE, Official Partner (Consultant) from the Ministry of Education in Luxembourg, project “MySecureIT“, Official Partner from the Ministry of Commerce in Luxembourg, project “CASES” (Cyberworld Awareness and Security Enhancement Structure).

The author was also a winner of an electronics contest (Germanic countries) in 1979 and got his project published in the “Electronics Magazine ELO”).

.

Stay tuned for next blog post(s) 😉

.

.

 

 

 

Tags: , , , , , , , , , , , , , , , , , , ,