Search Results for: i2c lcd

First Steps with the Arduino-UNO R3 and NANO | Maker, MakerED, MakerSpaces, Coding | How-To transform an LCD1602 SPI Sketch to an LCD1602 I2C Sketch

Fritzing-Wiring

. . How-To transform an LCD1602 SPI Sketch to an LCD1602 I2C Sketch We were already playing around, as seen on my tutorials below, with the Temperature/Humidity sensors DHT11, DHT22 and LCD1602, without I2C possibility. There were a lot of cables to connect, we will try out this time to use a LCD with I2C bus connection as it […]

First Steps with the Arduino-UNO R3 and NANO | Maker, MakerED, Coding | RFID RC522 Tag-Card Reader with LCD1602-I2C

RFID-RC522-LCD1602-I2C

.   . RFID RC522 Tag-Card Reader with LCD1602-I2C We were already playing around with LCD’s in our previous tutorial <===> First Steps with the Arduino-UNO R3 | Maker, MakerED, Coding | Super Starter Kit UNO R3 Project | LCD and Sensors Project <===> but there we used the SPI-Bus, meaning: connecting 12 wires (Potentiometer connections included…)!! With […]

First Steps with the Arduino-UNO and NANO | Maker, MakerED, MakerSpaces, Coding | Servo Motor Position displayed on 0.96 inch 128X64 I2C OLED

. . Servo Motor Position displayed on 0.96 inch 128X64 I2C OLED     WE were playing around already with OLED displays in previous tutorials <===> https://gustmees.wordpress.com/?s=oled <===> where WE created an Analog-Digital Clock a Temperature/Humidity Monitor with “Heat-Index” and Text messages on the OLED. In this tutorial WE will display the angle of  a rotating Servo-Motor on an […]

First Steps with the Arduino-UNO and NANO | Maker, MakerED, MakerSpaces, Coding | Analog-Digital Clock using Arduino NANO + RTC DS3231 + 0.96 inch 128X64 I2C OLED

. . Analog-Digital Clock using Arduino NANO + RTC DS3231 + 0.96 inch 128X64 I2C OLED WE were playing around already with <===> Temperature & Humidity monitor using Arduino NANO + DHT22 + 0.96 inch 128X64 I2C OLED <===> https://gustmees.wordpress.com/2019/08/26/first-steps-with-the-arduino-uno-and-nano-maker-makered-makerspaces-coding-temperature-humidity-monitor-using-arduino-nano-dht22-0-96-inch-128×64-i2c-oled/ <===> which displays the temperature in °F AND °C, as well as it displays the “Heat […]

First Steps with the Arduino-UNO and NANO | Maker, MakerED, MakerSpaces, Coding | Temperature & Humidity monitor using Arduino NANO + DHT22 + 0.96 inch 128X64 I2C OLED

. . Temperature & Humidity monitor using Arduino NANO + DHT22 + 0.96 inch 128X64 I2C OLED WE were playing around a lot already with I2C-LCD displays <===> https://gustmees.wordpress.com/?s=i2c+lcd <===> but not yet with I2C-OLEDs. In this tutorial WE will create a <===> Temperature & Humidity monitor using Arduino NANO + DHT22 + 0.96 inch 128X64 […]

First steps with the Arduino UNO, NANO | Displaying Time, Date, Temperature and Humidity on a LCD2004 Display | Maker, MakerED, Maker Spaces, Coding

. . Displaying Time, Date, Temperature and Humidity on a LCD2004 Display We were already playing around with a LCD2004 display in a previous tutorial where we displayed the temperature and the humidity <===> First Steps with the Arduino-UNO R3 and NANO | Maker, MakerED, Coding | I2C LCD Temp./Humidity displaying, now we will add […]

First Steps with the Arduino-UNO | Maker, MakerED, MakerSpaces, Coding | Make objects rotating with a Stepper-Motor | Tips and Tricks

. . Make objects rotating with a Stepper-Motor | Tips and Tricks Well, in a previous tutorial <===> https://gustmees.wordpress.com/2018/09/19/halloween-project-with-skull-arduino-blinking-leds-and-scrolling-eyes-maker-makered-makerspaces/ <===> we created a Halloween Skull and it was fix, didn’t rotate. Fun? YES, BUT more fun when it is rotating by using a Stepper-Motor; looks then as it would observe, control the space around it 😉 And it is […]

First Steps with the Arduino-UNO | Maker, MakerED, MakerSpaces, Coding | Make objects rotating with a Stepper-Motor

happy-halloween-rotating-skull

. . Make objects rotating with a Stepper-Motor Well, in a previous tutorial <===> https://gustmees.wordpress.com/2018/09/19/halloween-project-with-skull-arduino-blinking-leds-and-scrolling-eyes-maker-makered-makerspaces/ <===> we created a Halloween Skull and it was fix, didn’t rotate. Fun? YES, BUT more fun when it is rotating by using a Stepper-Motor; looks then as it would observe, control the space around it 😉 And it is […]